GV-POEX0100 is a single-port, 10/100 PoE extender that can extend the distance between a PoE switch and a GV-IP Camera by 100 m (328.08 ft) for every extender installed. They can be serially connected, with no additional power supply, to transmit power and data to a GV-IP Camera as far as up to 600 meters (1968.5 ft) away from a PoE switch.
GV-IP Cameras Powered by PoE
|
Brand & Model
|
PD of GV-IP Cameras
|
GeoVision
|
Third-Party PoE Switches
(IEEE 802.3at)
|
GV-POE0801 / 0811
GV-POE1601 / 1611
GV-POE2401 / 2411
|
GV-POE0400
GV-POE0800
GV-POE0810
|
PD < 6.49 W
(IEEE 802.3af)
|
600m
|
400m
|
400m
|
PD 6.5 W ~ 12.95 W
(IEEE 802.3af)
|
400m
|
200m
|
200m
|
PD 13 W ~ 25.5 W
(IEEE 802.3at)
|
200m
|
-
|
-
|
PD > 25.5 W
|
-
|
-
|
-
|
Note:
- Each GV-POEX0100 extends another 100 m (328.08 ft) between the PoE switch and the GV-IP Camera. Therefore, a distance of 200 m (656.17 ft) requires one GV-POEX0100 and 400 m (1312.34 ft) requires three etc.
- GV-POE0100 can only be connected using CAT-5e cables, TIA/EIA-568-B, with the maximum DC resistance of 9.38 ohms/100 m.
GV-IP Cameras Powered by Power Adapters
Brand & Model
|
GeoVision
|
Third-Party PoE Switches
(IEEE 802.3at)
|
GV-POE0801 / 0811
GV-POE1601 / 1611
GV-POE2401 / 2411
|
GV-POE0400
GV-POE0800
GV-POE0810
|
GV-IP Cameras
|
600m
|
400m
|
400m
|
The maximum distance allowed between a PoE switch and a GV-IP Camera depends on the PoE switch type, PoE power output of the connected device (PD) and the type of power supply.
GV-POEX0100 is only compatible with third-party switches that comply to PoE+ (IEEE 802.3at) and is not compatible with GV-PA191/481/482/901.
GV-POEX0100 supports all GV-IP Cameras when installed with a power adapter and does not support the following models when powered by PoE:
GV-BX2510-E / 5310-E
GV-FE3403 / 5303
GV-VD2540-E / 5340-E
GV-SD220 / 220-S
GV-POEX0100 is only compatible with the following GeoVision PoE switches of the indicated firmware versions:
GV-POE0801 / 1601 / 2401 (V1.03 or later)
GV-POE0811 / 1611 / 2411 (V1.01 or later)